Model 26 Truss
Our finest sliding model engineered to fit most standard-size folding stair openings.

THIS IS A SOLID LADDER IT DOES NOT FOLD!  FOR A FOLDING MODEL PLEASE SEE THE SPACESAVER
Specially designed to fit between 24" O.C. truss ceiling.

Hydraulic-dampened door closure.


High quality solid one-piece stringers and treads made of 1" x 6" yellow pine.


Suggested Load Capacity 600 lbs

Ladder width 14".

Bessler Model 26T Attic Ladder

Will fit ceiling thickness from 6-1/4" to 12"

Partially assembled for quick and efficient installation.  Hardware and door panel pre-attached to 6-3/4" frame.  Fasten stairway to hardware, attach 3 treads and you're ready to go.

Ladder rods under each tread.  Includes full length handrail.




Shipping weight 85 lbs.


Size
A
Floor to
Floor
B
Radius
Above
C
Plumb Height
Above
D
Run
Below

Rough
opening
1
7'-7" to 7'-10"
4'-9
4'-2"
3'-9:"
22-1/2" x 54"
2
7'-11" to 8'-4"
5'-8"
4'-7"
3'-11"
22-1/2" x 54"
3
8'-5" to 8'-10"
6'-2"
5'-1"
4'-2"
22-1/2" x 54"
4
8'-11" to 9'-4"
6'-8"
5'-7"
4'-5"
22-1/2" x 54"
5
9'-5" to 9'- 10"
6'-7"
6'-1"
4'-8"
22-1/2" x 60
6
9'-11" to 10'-4"
6'-2"
8'-7"
4'-11"
22-1/2" x 60
7
10'-5" to 10'-10"
7'-8"
7'-1"
5'-2"
22-1/2" x 74"
8
10'-11" to 11'-4"
8'-2"
7'-7"
5'-5"
22-1/2" x 74"
9
11'-5" to 11'-10"
8'-8"
8'-1"
5'-8"
22-1/2" x 74"
NOTE:
*Also Available for ROUGH OPENING of 54"
Partially assembled for quick and efficient installation.  Hardware and door panel pre-attached to 6-3/4" frame.  Fasten stairway to hardware, attach 3 treads and you're ready to go.
Shipping weight Approximately 85 lbs.